Just how do you actually feel in regards to What Would Cause My Electric Water Heater to Stop Working??
Many modern-day houses make use of an electrical water heater for their furnace, because of its convenience and also simplicity of use. However, similar to any other electrical devices, issues might occur with its use, suddenly. It can be really discouraging to wake up to a cool shower rather than a warm one or having your bath with water that isn't warm sufficient or even also warm. Whatever the situation may be, hot water heater problems can be rather nerve-racking. Luckily, we've made a checklist of possible remedies to your water heater problems. There are a variety of aspects that can cause much of these problems, maybe a concern with the power supply, the electrical burner, or the thermostat. Before doing anything, ensure you switch off the main power supply for safety and security. Whatever the problem is, getting it taken care of should not present way too much of a problem if you adhere to these steps:
Inspect Your Power Supply:
As standard as this may appear, it is really required. Without appropriate power, your water heater will not operate. So the first thing to do when your water suddenly stops working is to validate that it isn't a power problem. Inspect if the fuse is burnt out or the circuit breaker tripped. If the breaker is the concern, simply transform it on and off again. Replace any type of busted or worn-out fuse. Evaluate the device with power after these changes to see if it's now working.
Inspect the Burner in the Hot Water Heater:
If it's not a power problem, then attempt looking into your heating element if it is still working. Check each of your burner to ensure the problem isn't with any of them. If any of them is malfunctioning, change that component and then inspect whether the hot water is back on.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't hot enough, you may need to inspect the temperature level setups on your top thermostat. Ensure the circuit breaker is switched off before doing anything. Open the gain access to panel as well as press the red switch for temperature level reset over the thermostat. This need to help heat the water. Turn the circuit breaker back on and inspect if the problem has been dealt with.
Call A Specialist:
If after changing all faulty parts and resetting your temperature, the water heater still isn't working, you may need to contact an expert plumber for a professional opinion. The problem with your heater could be that the hot and cold faucets have been changed or it might be undersized for the quantity of warm water required in your house. Whatever the situation may be, a professional plumber would help address the trouble.
Verdict
Water heater issues are not always major. Many of them are due to small concerns like a blown fuse or damaged heating element. Replacing the damaged components must work. However, if you are still incapable to fix the issue, give a call to your nearest plumber ahead to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We hope you enjoyed reading our article about What Would Cause My Electric Water Heater to Stop Working?. Many thanks for spending some time to read through our piece. Sharing is caring. You never know, you may just be doing someone a favor. Thanks a bunch for your time. Don't forget to stop by our blog back soon.
Book Your Installation